Bar

---

304 and 316 available.

Length: Standard length 4 metres. Minimum cut lengths and cutting charges may apply.

Finishes: Diameter 25mm (1′) and under – ASTM A276, cold drawn/polished.

Diameter greater than 25mm (1′) ASTM A276 smooth turned, improved machining abilities.

Flat Bar

304 and 316 available

Length: Standard lengths 4 metres. Minimum cut lengths and cutting charges may apply.
Finishes: SRE = Slit Rolled Edge, Polished = between 120 – 240 grit, HRAP = Hot Rolled Annealed and Pickled.
Additional Services: Polishing available – lead times may apply.

Square Bar

304 and 316 available. Length: Standard lengths 3 metres. Minimum cut lengths and cutting charges may apply.
Finishes: CD = Cold Drawn, HRAP = Hot Rolled Annealed and Pickled.

Angle Bar

304 and 316 available. Length: Standard lengths 4 metres for CF and 6 metres for HRAP. Minimum cut lengths and cutting charges may apply.
Finishes: CF= Cold Formed smooth bright finish/edge with radius external corner,
HRAP = Hot Rolled Annealed and Pickled.

Channel Bar

304 available. Length: Standard lengths 6 metres.
Minimum cut lengths and cutting charges
may apply.
Finishes: HRAP = Hot Rolled Annealed and Pickled.